What is Lithium stearate powder

Lithium stearate is a crystalline form of lithium.

Lithium stearate has the chemical formula LiSt. It is a white powder that is solid at room temperatures. It is highly lubophilic and forms high light transmission at low concentrations. This compound is only slightly soluble when heated to room temperature, but it dissolves readily in organic solvents including acetone and alcohol. Lithium Stearate is stable and thermally safe at high temperatures because it has a melting and flash point. The lithium stearate also has good chemical resistance and is resistant to acids and bases, as well as oxidants, reductants and reducing agents. Lithium is a less toxic substance, but should still be handled with care. An excessive intake of lithium can lead to diarrhoea or vomiting as well as difficulty breathing. Wearing gloves and goggles during operation is recommended because prolonged exposure to lithium can cause eye and skin irritation.

Lithium stearate:

Surfactant: Lithium Stearate Surfactant, lubricant, and other ingredients are used to make personal care products, such as shampoos, soaps, and body washes. It has excellent foam properties and good hydrolysis stabilty, resulting in a gentle and clean washing experience.

Lithium stearate has an important role to play in polymer syntheses. It can be used both as a donor and a participant in the formation of polymer chains. These polymers have good mechanical and chemical properties, making them ideal for plastics, rubber fibers, etc.

Lithium stearate can be used in cosmetic formulations to soften and moisturize the skin. It enhances moisturization, and makes the skin feel softer and smoother. The antibacterial and antiinflammatory properties of lithium stearate can also help with skin problems.

Paints & Coatings: Lithium is used to thicken and level paints & coatings. It helps control the flow, as well as the properties of final coatings. It is resistant to weather and scratches, which makes the coating durable.

Applications of lithium stearate include drug carriers, excipients, and stabilizers. It can enhance the taste and solubility and stability of medications.

Lithium stearate has many uses in agriculture, including as a carrier for fertilizer and a plant-protection agent. It increases the efficiency of fertilizers and improves plant disease resistance.

Petrochemicals: In the petrochemicals industry, lithium stearate may be used as an lubricant or release agent. As a catalyst in petroleum cracking, lithium stearate improves cracking yield and efficiency.

Lithium stearate production method :

Chemical synthesis method

Lithium stearate can be synthesized through a series chemcial reactions that combine stearate and lithium metal. In order to get the two reacting fully, lithium metal is heated in an organosolvent and then the root of stearate is stirred. After washing and drying, the pure lithium-stearate product is obtained.

Following are the steps for synthesis.

The lithium metal in organic solvents, such as ethanol (heated stirring), so that they fully react.

(2) The reaction solution must be cooled in order to precipitate lithium stearate.

(3) Wash the crystal with water and remove any lithium stearate particles.

(4) The dried crystals will be used to make lithium stearate.

The benefits of chemical synthesis include a matured process, high production efficiency, and high product quality. However, organic solvents have a negative impact on the environment. A certain amount of waste is generated during production.

Methode de fermentation biologique

In biological fermentation, microorganisms such as yeast are used in the medium to produce lithium. The principle behind this method is that microorganisms use their metabolic pathways to produce stearic and react with metal ions, such as lithium, to create lithium stearate.

These are the steps that you will need to take in order to produce your product.

(1) The microorganisms inoculated are placed into the medium containing pre-fermentation substances;

(2) The filtrate is used to produce a solution of stearic acetic acid.

Add metals (such as the lithium ions) into the solution with stearic to ensure that they fully react.

(4) The reaction mixture is separated, then washed and dried.

The benefits of biological fermentation include environmental protection, less waste discharge and a longer production process. However, the conditions for production are also higher.

Prospect Market of Lithium Stearate:

The application of lithium in personal care will continue to play a major role. It plays a vital role as a surfactant in soaps, cosmetics, body wash, and shampoos. As people's standards of living improve and the cosmetics sector continues to expand, lithium stearate demand will gradually rise.

Second, the use of lithium stearate for polymer synthesis has also increased. It can be used both as a donor and a participant in polymer chain formation. As polymer materials science continues to develop, the demand of lithium stearate increases.

Lithium stearate's application in agricultural, petrochemical, pharmaceutical and other fields is expanding. In the pharmaceutical sector, lithium stearate may be used as a carrier, excipient or drug stabilizer. In agriculture, the lithium stearate is used to protect plants and as a carrier for fertilizers. In the field of petrochemicals, lithium isostearate may be used as an lubricant or release agent. In these areas, the demand for lithium will increase as technology advances.

But the outlook of the lithium stearate market is not without its own challenges. In order to produce lithium stearate, it is necessary to use lithium metal. This increases the production costs. Aside from that, the applications of lithium is limited, with a concentration in agriculture, petrochemicals, polymer syntheses, personal care products, pharmaceuticals and agrochemicals. To expand the scope of application and market demand for lithium stearate, it is important to continually develop new applications and markets.

Lithium stearate powder price :

Many factors influence the price, such as the economic activity, the sentiment of the market and the unexpected event.

You can contact us for a quotation if you're looking for the most recent lithium stearate price.

Lithium stearate powder Supplier:

Technology Co. Ltd. has been supplying high-quality chemical materials for over 12 years.

The chemical and nanomaterials include silicon powders, nitride particles, graphite particles, zinc sulfide crystals, boron oxide, etc.

Contact us today to receive a quote for our high-quality Lithium Stearate Powder.

What is a polycarboxylate superplasticizer

In 2023, the China Greater Bay Area Concrete Industry High-Quality Development Seminar and the Expo on Concrete Equipment and Technology will take place at the Guangzhou Canton Fair Complex. Guangzhou Canton Fair Complex. The conference's theme will be "Gathering Talents and Gathering Power, Talking about Smart Concrete," co-sponsored by the Guangzhou Concrete Industry Association and Guangdong Hongwei International Exhibition, responsible persons from the Guangzhou Municipal Bureau of Housing and Urban-rural Development, Municipal Bulk Cement and Building Energy Conservation Management Center as well as Concrete Industry Experts as well as representatives from downstream and upstream companies participated at the show.


A concrete core sample 200 millimeters in diameter and an overall long 25.3 meters was successfully removed from the RCC gravity dam in the Fengshan Reservoir Project in Qiannan Buyi and Miao Autonomous Prefecture, Guizhou Province, China. The length of the core sample is the longest among water conservancy projects within Guizhou Province, marking that the quality of construction and technology of the dam in the Fengshan Reservoir Project has reached the top standard.

The concrete pouring for the first warehouse at the Qishi Junction of the Pinglu Canal in China has started, which signifies that the three main points of operation for the Pinglu Canal have entered a new phase of building the main structure. This Pinglu Canal is the backbone of the land-sea channel that runs through the west. When it is finished and open to navigators, the canal will let the world's narrowest, most cost-effective, and most efficient ocean channel between Guangxi and Southwest China.


1. What is a polycarboxylate superplasticizer?

Polycarboxylate superplasticizer is used primarily in cement concrete to act as a dispersant. It is composed of polymers containing sulfonic acid group (-SO3H) and carboxyl groups (-COOH) or derivatives of them and features high efficacy, environmental protection, and security.

The role of a polycarboxylate superplasticizer is primarily to disperse cement particles more evenly by adhering to concrete particles' surfaces, decreasing the amount of water needed, and increasing the strength and flexibility of concrete in the process. Compared to traditional water-based water-reducing agents, polycarboxylate agents have a higher water reduction rate and workability that can significantly enhance the performance and strength of concrete.


2. Superplasticizers that are applied to polycarboxylate.

Polycarboxylate Superplasticizer is commonly employed in cement concrete as a dispersant. Apart from its use in bridges, highways, tunnels, dams, high-rise buildings, and various other engineering areas, it is extensively utilized for grouting, pouring material such as anchoring, plugging the waterproof mortar K11 cement self-leveling, prefabricated components, special mortars, and various other construction materials. The applications of polycarboxylate superplasticizers in these areas will be described below.


1. Highway Engineering

In highway engineering, superplasticizers made of polycarboxylate are used to make high-performance highway concrete, which can increase durability and wear endurance on the surface of roads. The superplasticizer polycarboxylate's water-reducing capacity can significantly reduce water consumption in concrete, increase concrete's strength and flexibility, and make the road surface more dense, smoother, other, smoother, and more robust. The use of polycarboxylate superplasticizers in highway engineering will fulfill the highway construction's safety, green, and durability demands.



2. Bridge Engineering

When it comes to bridge design, superplasticizers made of polycarboxylate can be used to create bridge concrete with great strength and fluidity to increase bridges' bearing capacity and service life. The high water-reducing capacity and high workability of the polycarboxylate superplasticizers can significantly enhance Bridge concrete's performance, increase the uniformity and compactness of concrete, lessen the formation of bridge cracks, and consequently increase the longevity and safety of bridges.


3. Dam Project

When it comes to dam design, superplasticizers made of polycarboxylate are used to make high-strength, high-impermeability dam cement to increase the stability and security of the dam. Dams are an essential structure that stores water resources and manages water flow. It also has demanding requirements for the stability and safety that the dam. Utilizing polycarboxylate superplasticizers will increase the resistance and impermeability of concrete dams and effectively stop cracks and leakage, improving the dam's stability and security.

4. Tunnel Engineering

Tunnel engineering is a field where superplasticizers of polycarboxylate are used to make high-strength and high-impermeability tunnel concrete to increase the durability and stability of the tunnel. Tunnels are crucial underground structures used for transport and transport, so the requirements for durability and stability of tunnels are demanding. Using superplasticizers made from polycarboxylate will increase the durability and strength of tunnel concrete. It can effectively stop cracks and leaks, improving the tunnel's durability and stability.


5. High-rise buildings

In high-rise structures, Polycarboxylate superplasticizers are employed to make high-strength, highly-fluidity concrete for high-rise buildings to improve the safety and stability of structures. Because of the number of floors and the high building heights, their requirements for the strength of the structure and seismic performance of buildings are extremely significant. Utilizing polycarboxylate superplasticizers will enhance the strength and flexibility of high-rise concrete. It can significantly improve the strength of structures and the earthquake performance of structures, increasing the stability and security of structures.


6. Material pouring, grouting anchoring, plugging, and many more fields.

Apart from its use in engineering fields like dams, bridges, road tunnels, and high-rise structures, polycarboxylate superplasticizers are extensively used in construction materials, such as grouting agents and pouring materials, as well as anchoring and plugging. In these areas, the function of superplasticizers made from polycarboxylate is mostly by adsorption on the surfaces of cement particles, ensuring that the cement particles become more evenly distributed, thus reducing the quantity of water needed while at the same time improving the quality and consistency in the materials. These applications can fulfill various specific maintenance and construction requirements.


How do you make polycarboxylate superplasticizers?

Polycarboxylate superplasticizer is extensively utilized in cement concrete to act as a dispersant. The process of making it can be broken down into the steps below:


synthetic macromonomer

It is first necessary to create macromonomers. This is one of the primary processes in producing superplasticizers from polycarboxylate. The macromonomer is the primary component of the superplasticizer polycarboxylate that has polymer chains and polar company and can be adsorbed on the surfaces of cement particles to be superplasticizers. The most popular method used is free radicals' polymerization; the primary raw materials include unsaturated acids, such as methacrylic acid, acrylic acid, and maleic acid, and polymers like polypropylene glycol and polyethylene glycol. In the process of synthesis, it is crucial to regulate the temperature of the reaction and time, as well as the proportion of ingredients and other variables, to ensure the yield and quality of the macromonomer.


Polymerization

Once the macromonomer has been synthesized, a polymerization reaction is necessary. The polymerization reaction will react to the macromonomer using an oxidizing agent, such as ammonium persulfate, to create one with a higher level of polymerization. When performing this procedure, it is important to be aware of variables like reaction temperature and the time and quantity of oxidant used to ensure the polymerization process's efficiency as well as the quality of the product.


Post-processing

After the polymerization reaction is complete, post-treatment is needed. The post-treatment process involves dissolving the water and polymer to the ratio specified, adding acidic compounds for neutralization, adjusting the pH that the solution has, and then the addition of a protective colloid as well as other components to produce the final superplasticizer made of polycarboxylate. It is essential to regulate the amount of solution, the pH value, the kind and amount of protective colloid, and other variables to guarantee the quality and effectiveness of the solution.


4. Market prospects analysis of superplasticizer polycarboxylate

Due to the rapid growth in the field of construction, demand for polycarboxylate superplasticizers is growing, and the opportunities are vast. This article will examine the potential market for superplasticizers made from polycarboxylate based on the demand for market products, the policy environment, technological advancement, competition patterns, and the latest trends.

 

1. Market demand

As urbanization is accelerating and the continued development in infrastructure development, the demand for cement concrete has been growing each year, driving the demand for superplasticizers made of polycarboxylate. Polycarboxylate superplasticizer offers the benefits of an excellent water-reducing capacity, a high working capacity, a lower shrinkage rate, and so on. It can also significantly enhance the performance and durability of concrete. This is why it is extensively used in engineering areas such as bridges, roads, dams, tunnels, and high-rise structures. A lot of people use it. As the years progress, due to the constant advancement in infrastructure construction and the constant improvement in the quality of buildings, the need for polycarboxylate superplasticizers will continue to increase.


2. Policy environment

After the pandemic struck the world, various policies for improving the construction industry have been introduced, and across the globe are now recognizing the importance of infrastructure to spur economic development. One of them is the Chinese "Outline for the Modernization of the Construction Industry," which recommended that by 2030, the size of the construction industry would reach the target of around 20% of the nation's GDP. In the meantime, China's standards for environmental protection and conservation of energy are getting strict, and this provides an incentive for policymakers to develop superplasticizers that are made of polycarboxylate. Similar policies have been enacted across China to encourage and facilitate the manufacturing and utilization of polycarboxylate superplasticizers. Also boosting demand for superplasticizers made of polycarboxylate.


3. Development of technology

With the constant advancement of new technology and science, polycarboxylate superplasticizers' manufacturing technology and performance are constantly upgraded. Today, superplasticizers made by polycarboxylate manufacturers from around the globe are continuously pursuing technological research, development, and development and have introduced an array of brand new superplasticizers made of polycarboxylate including high water-reducing models and high slump retention varieties and those with low shrinkage. Wait. Introducing these products will further expand the scope of polycarboxylate superplasticizers' applications and market spaces.


4. Competitive landscape

The polycarboxylate superplasticizer market has developed into a remarkably competitive pattern of fierce competition. Certain well-known and well-known foreign construction materials firms are using the market for polycarboxylate superplasticizers and launching various items and products. However, smaller companies are also gaining entry into the market, and competition is growing increasingly fierce. In today's competitive market, businesses must continue to increase their service and product quality levels and cut production costs to gain market share.


5. Trends

Shortly, due to the constant growth within the industry of building the market for superplasticizers made from polycarboxylate will be able to present these trends.

High performance In developing engineering requirements, the performance of polycarboxylate superplasticizers has to be continually improved to meet the needs of high-performance concrete.

Protection of the environment: As environmental protection requirements and energy efficiency are becoming increasingly demanding, polycarboxylate superplasticizers must be more eco-friendly and energy-efficient.

Customization Diverse concrete fields and industries require different kinds of superplasticizers made of polycarboxylate to ensure that consumers will accept personalized polycarboxylate products.

Intelligent: With the advancement of technologies for information and intelligence, the next polycarboxylate superplasticizer will be more sophisticated and capable of achieving automatic production and intelligent use.

In the end, the potential for market share growth for superplasticizers made of polycarboxylate is huge. However, it is necessary for businesses to constantly improve the quality of their services and products to satisfy the changing demands of the market and to adapt to changes. In the meantime, continuous technological research, as well as innovation and advancement, are vital to meet the market's needs and predict future growth trends.

Why does properly poured concrete end up cracking

It is very easy to cause concrete cracking if the construction or maintenance are not done correctly. What are then the five main causes of cracking concrete?

1. The cement proportion problem: Some workers in construction will add more water for a more fluid concrete. However, this will result in an increase in water-cement ratio. This will cause the concrete to harden too quickly, and lead to cracking.

2. Transport and mixing issues: If mixing and transportation of concrete is prolonged, the concrete may lose water and evaporation. concrete . This leads to a concrete that is weaker on the construction site, unable to meet construction specifications.

3. Construction speed

4. Maintenance is unreasonable. During the period of maintenance, if late watering isn't maintained, the result will be the Cracking phenomenon Later in the year, concrete will be used. Concrete is used in the future. Concrete Surface Watering You can water the surface of the concrete often to speed up the drying process. Concrete will shrink if it is not watered. Late cracking occurs when concrete strength is decreased.

5. Environmental factors: If the environment at the construction site is relatively dry and there is high temperature, wind, or both, then the concrete surface will crack more quickly. Concrete constructions are most likely to crack in summer and winter due to the temperature difference.

Add a crack-preventing agent. A variety of inorganic composite materials can prevent the foam concrete from cracking by more than 80%. Add 2-3 kilograms of anti-cracking material per cubic meter.

What is Molybdenum disulfide MoS2 powder

Description of Molybdenum diulfide

Molybdenum disulfide (also known as MoS2) is a transition metal sulfide. It is dark grey, or even black in color. It has a layering crystal structure consisting of alternately arranged sulfur and molybdenum molecules. Molybdenum disulfide This material is good in terms of chemical and thermal stability. It can be easily reacted to acids or bases. It is a widely used ingredient in lubricants. As an excellent oil, molybdenum diulfide offers a high load bearing capacity, low friction coefficient and good friction resistance. It is used widely in the manufacturing of machinery, petrochemicals and automobiles. In extreme environments such as high temperature, high loads, or high speeds, the molybdenum diulfide plays a lubricating function, reducing friction and wearing, and extending the service life. Molybdenum diulfide, when used as a fuel additive, can increase the efficiency of combustion and reduce pollutants. This additive plays a major role in protecting the environment, as it reduces air pollutants and improves energy efficiency.

Use of Molybdenum diulfide

Molybdenum diulfide is a compound that has outstanding chemical and physical properties. It is widely used in many fields. It has excellent chemical and mechanical properties. Following are some of the most important applications for molybdenum sulfide.

Lubricants: Molybdenum diulfide, a lubricant that is excellent in terms of friction coefficient, load-carrying capability and friction resistance. It has a high lubrication capacity in high-temperature, high-load and high-speed environments. This is why it's widely used in the machinery industry, automobile manufacturing, and petrochemical industries. The molybdenum-disulfide lubricant is also used to produce lubricating grease, lubricating oil and lubricating film.

Additive - Molybdenum Disulfide, when used as a fuel additive, can increase the efficiency of combustion and reduce emissions. This additive plays a major role in protecting the environment by reducing air pollution and improving energy efficiency. As an additive, molybdenum can be added to rubber, plastics or coatings in order to improve their properties.

Composite materials. Molybdenum Disulfide can also be mixed with rubber and resins to produce high-performance materials such as reinforced fibres or composite plastics. These composites offer excellent mechanical properties, corrosion resistance, and are widely used for automotives and aerospace.

Electronic industry Molybdenum disulfide It can be used for the electronic vapour deposition of thin MoS2 films. These thin films have excellent electrical conductivity, and transmit light well. This thin film material is suitable for optoelectronics applications, including solar cells and displays. The molybdenum-disulfide material can also be used to create transistors, Field-Effect Transistors and other electronic components. These electronic components have excellent semiconductor performance and good electronic mobility.

Production Methods of Molybdenum Diulfide

Molybdenum diulfide, a compound with excellent chemical and physical properties, is used in numerous fields. The production process can be done in many ways, including double decompositions, synthesises, flotation or electroplating. Synthesis is the most commonly used method for producing molybdenum.

The synthesis is a way to make nano MoS2 using a molybdenum, tungsten source. This method can produce sulfides of high purity with fewer impurities. This method can produce sulfides to meet different functional needs, and so it has been given much attention. The steps in the synthesis include preparation of raw materials, chemical reactions, product separation, and purification.

During the preparation of raw materials, it is important to prepare a source of tungsten or molybdenum and a source for sulfur. Tungsten, molybdenum or metal powders are the most common sources. While sulfur can be either elemental sulfur or sulfur dioxide. The purity, chemical properties and reactions conditions of the raw materials are important factors to consider when selecting tungsten and molybdenum or sulfur sources.

During the chemical reaction, tungsten is converted into tungsten or Molybdenum Sources The molybdenum is disulfide produced in biochemical reactions that occur at high temperatures. Specific conditions for the reaction include temperature, reaction time, and reaction atmosphere. The temperature and reaction time of the reaction have an important effect on particle size and product purity. Reaction atmosphere has a similar impact.

In the separation and purification phase, molybdenum diulfide is extracted from the reaction product using the appropriate separation and filtration methods. Precipitation, filtration and distillation are some of the most common separation and purification processes. These methods can be used to separate the molybdenum diulfide from impurities and obtain molybdenum products with high purity.

Other methods are available to produce molybdenum sulfide. These include the double decomposition technique, the flotation method, and the electroplating method.

The compound decomposition technique produces molybdenum by reacting ammonium motate or ammonium tantate with ammoniumsulfide. The method is able to produce molybdenum sulfide even at lower temperatures. It can also prepare different molybdenum sulfide products, such as those with different particle sizes and morphologies.

Flotation is the process of extracting molybdenum diulfide by using organic agents and grinding tungsten, molybdenum or other sources with minerals like pyrite or Sphalerite. This method is able to produce molybdenum products with high purity, but requires more organic chemicals and a more complicated production process.

Electroplating is the process of electroplating molybdenum on a metal surface. By using this method you can create molybdenum-disulfide films that have excellent properties. However, the chemicals and waste liquids in the electroplating will pollute the surrounding environment.

The different production methods all have their own advantages and drawbacks. You should choose the best method for your needs. It is also important to consider environmental protection and safety during the production process.

Prospect Market for Molybdenum Diulfide

Molybdenum diulfide is an important chemical compound that has excellent chemical and physical characteristics. It's widely used in machines, industry electronics and aerospace. Demand for molybdenum diulfide has increased due to the continued development of global economies and the rapid development in high-tech areas. Molybdenum Disulfide Market has a wide range of prospects for the future.

Molybdenum Disulfide, as a highly-performance lubricant used in a variety of fields, including machinery manufacturing and automobile manufacturing. As industrialization continues and mechanical equipment becomes more precise and automated, the demand for lubricants will increase. Molybdenum diulfide has a high performance and is in great demand.

In the second place, molybdenum dioxide can be added to fuels as an additive that will improve combustion efficiency, reduce pollution, improve air quality, and increase energy efficiency. As environmental awareness continues to grow and environmental policies are strengthened, the use of molybdenum dioxide as an additive that is environmentally friendly will continue to be promoted.

Molybdenum diulfide, when combined with other materials such as resins, fibres composites, and rubbers to produce composite materials of high performance, can also be used. These composites have excellent mechanical and corrosion-resistant properties and are widely used by the automotive, aerospace, electronic and other industries. High-performance materials are in high demand due to the rapid growth and development of the high-tech industry. Molybdenum is one component and will see its demand increase.

The molybdenum-disulfide compound can be used for new applications such as energy storage and solar cells. As new energy technologies continue to be developed, demand for molybdenum will increase. This will provide new momentum for the development of the market.

In addition, as the production costs are reduced and the process is continuously improved, the price for molybdenum will continue to fall, which will encourage further growth in the market. In parallel, as environmental awareness increases and technological progress continues, some new production technologies and processes will be slowly applied to the production molybdenum. This will promote further development of the molybdenum market.

According to the report from the market research company the global molybdenum market will continue rapid growth for the next several years with an annual rate of growth of over 10%. Globally, it is estimated that the molybdenum-disulfide industry will surpass $1 billion in 2025. China is a big producer and user of molybdenum, so the market will continue to grow rapidly.

Molybdenum disulfide Powder Price :

Many factors influence the price, such as the economic activity, the sentiment of the market and the unexpected event.

You can contact us for a quotation if you want to know the current price of Molybdenum diulfide powder.

Molybdenum disulfide Powder Supplier :

Technology Co. Ltd. has been a leading global chemical supplier & manufacturer for over 12 years.

Chemicals and nanomaterials of high quality, including silicon powder (nitride), graphite powder (graphite oxide), zinc sulfide (zinc sulfide), boron powder (3D printing powder), etc.

Send us an email if you want to know more about our high-quality Molybdenum diulfide powder.

Preparation method of tungsten boride

Tungsten Boride WB2 Powder Overview

Tungsten boride, CAS number 12007-09-9, molecular formula BW, molecular weight 194.651, black powder, crystal WB belongs to tetragonal system. Tungsten boride is mainly used for wear-resistant coating wear-resistant layer and semiconductor thin film.

{xunruicms_img_title}

Preparation method of tungsten boride

The synthesis method of ditungsten boride is as follows:

1. Use metal tungsten and boron as raw materials, mix and grind them fully, heat and react at above 1400℃ to obtain tungsten boride, continue to react to generate W2B, and then cool and pulverize to obtain the product.

2. Mix tungsten and stoichiometric boron powder in a molar ratio of W:B=2:1, and sinter at 1200-1300℃ in vacuum or argon atmosphere to obtain ditungsten monoboride.

3. Using the solid phase method. Tungsten boride is prepared from metal tungsten and boron. The reaction formula is as follows. The stoichiometric amount of metal tungsten powder and elemental boron are fully mixed, ground, and shaped, and heated and reacted at above 1400 ° C to obtain tungsten boride. Continue the reaction to generate W2B, which is cooled and pulverized to obtain the product.

Application of tungsten boride WB2 powder

Abrasion resistant coatings for wearing parts and semiconductor thin films. Storage conditions of tungsten boride WB2 powder: wet agglomeration affects the dispersion performance and use effect of WB2 powder, so tungsten boride WB2 powder should be sealed in vacuum packaging. WB2 powder should not be exposed to air. Also, avoid using WB2 powder under pressure. Packaging and Shipping of Tungsten Boride WB2 Powder: We have many different types of packaging, depending on the quantity of Tungsten Boride WB2 powder. Tungsten boride WB2 powder packaging: vacuum packaging. 100g.500g or 1kg/bag.25kg/drum or as your request.

Tungsten boride WB2 powder price

The price of tungsten boride WB2 powder will change randomly with the production cost, transportation cost, international situation, exchange rate and supply and demand of tungsten boride WB2 powder market. Tanki New Materials Co., Ltd. aims to help industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for tungsten boride WB2 powder, please feel free to send an inquiry to get the latest price of tungsten boride WB2 powder.

Tungsten Boride WB2 Powder Supplier

As a global supplier of tungsten boride WB2 powder, Tanki New Materials Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (including oxides, carbides, nitrides, single metals, etc.), high-purity targets, functional ceramics and structural devices, and provides OEM services.

Tungsten Diboride Properties
Other Namestungsten boride, WB2 powder, tungsten boride WB2
CAS No.12007-09-9
Compound FormulaWB2
Molecular Weight205.5
AppearanceGray Black Powder
Melting Point2365 °C
Boiling PointN/A
DensityN/A
Solubility in H2ON/A
Vickers Hardness20 GPa
Exact Mass205.969544 g/mol
Tungsten Diboride Health & Safety Information
Signal WordN/A
Hazard StatementsN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
Transport InformationN/A



Magnesium oxide product types

The US Commerce Secretary has announced that the US will temporarily lift tariffs imposed on Ukraine during the Trump administration to help Ukraine recover its economy and continue to show support for the Russia-Ukraine situation. "For steel mills to remain an economic lifeline for the Ukrainian people, they must be able to export steel," the Commerce Department said in a statement.

The Biden administration will announce the lifting of steel tariffs on Ukraine for one year.  Ukraine is a fairly small supplier of U.S. steel, shipping about 218,000 tons in 2019, ranking it 12th among foreign suppliers to the United States, the report said. The U.S. Commerce Department noted that the steel industry is uniquely important to Ukraine's economic strength, with one in 13 people employed in the steel industry. 

Affected by the ever-changing international situation, the supply and prices of international bulk Magnesium Oxide, MgO Overview, Magnesium Oxide Application, MgO Suppliers, Magnesium Oxide Price are still very uncertain.

Magnesium oxide MgO overview

Magnesium oxide MgO is an alkaline oxide with the same properties as alkaline oxides. It is a gelling material, white or off-white powder, odorless, tasteless and non-toxic. It is a typical alkaline earth metal Oxide, with chemical formula MgO. Melting point 2852°C, boiling point 3600°C, density 3.58g/cm3 (25°C). Soluble in acid and ammonium salt solution, insoluble in alcohol. The solubility in water is 0.00062 g/100 mL (0 °C) and 0.0086 g/100 mL (30 °C). When exposed to the air, it is easy to absorb water and carbon dioxide and gradually become basic magnesium carbonate. Lightweight products are faster than heavier ones. It combines with water to generate magnesium hydroxide under certain conditions, which is slightly alkaline reaction. The pH of the saturated aqueous solution was 10.3. Soluble in acid and ammonium salt, insoluble in water, the solution is alkaline. Insoluble in ethanol. It has a strong refraction effect in the visible and near-ultraviolet light range. Magnesite (MgCO3), magnesium oxide. The seawater is treated with slaked lime to obtain magnesium hydroxide precipitation, and the magnesium hydroxide is burned to obtain magnesium oxide. It is also possible to use the magnesium chloride halide obtained from the comprehensive utilization of seawater or the brine after the bromine extraction as the raw material, and add sodium hydroxide or sodium carbonate. Magnesium hydroxide or basic magnesium carbonate is produced to precipitate and then burn to obtain magnesium oxide. my country mainly uses magnesite, dolomite, brine or brine as raw materials.

{xunruicms_img_title}

Magnesium oxide product types

Classification: divided into light magnesium oxide and heavy magnesium oxide. Lightweight and loose in volume, it is a white amorphous powder. Odorless, tasteless and non-toxic.

Industrial grade light burn

Application: Mainly used in the production of magnesite products. Light-burned magnesium oxide and magnesium chloride aqueous solution in a certain proportion can be gelatinized and hardened into a hardened body with certain physical and mechanical properties, which is called magnesite cement.

Advanced Lubricant Grade

Applications: Mainly used as cleaning agent, vanadium inhibitor and desulfurizer in advanced lubricating oil processing, greatly improving the density and rheology of lubricating film and reducing ash content. The removal of lead and mercury can reduce the pollution of lubricating oil or fuel waste to the environment. Surface-treated magnesium oxide can also be used as a complexing agent, chelating agent and carrier in the refining process, which is more conducive to product fractionation to improve product quality.

food grade

Application fields: used as food additives, color stabilizers, pH adjusters, as supplements of magnesium in health products and food.

medical grade

Application field: In the field of biopharmaceuticals, medical grade magnesium oxide can be used as antacid, adsorbent, desulfurizer, lead remover, complex filter aid, PH adjuster. In medicine, it can be used as antacid and laxative to inhibit and relieve Hyperacidity, treatment of gastric and duodenal ulcers. The neutralizing effect of gastric acid is strong, slow and long-lasting, and does not produce carbon dioxide.

Silicon steel grade

Application field: silicon steel grade magnesia has good magnetic permeability (that is, has a large positive magnetic susceptibility) and excellent insulating properties.

Advanced Electromagnetic Grade

Application fields: used for wireless high-frequency paramagnetic permeability materials, magnetic rod antennas, magnetic cores of frequency modulation components, etc. instead of ferrite. It can be used in the production of composite superconducting magnetic materials and also in the electronic magnetic industry. As "soft magnetic material". It is also an ideal raw material for industrial enamels and ceramics.

High Purity Magnesium Oxide

Application field: High-purity magnesium oxide has excellent alkali resistance and electrical insulation at high temperature. High coefficient of thermal expansion and thermal conductivity with good light transmittance. Widely used as high temperature heat resistant material. In the field of ceramics, it is used as a raw material for light-transmitting ceramic crucibles and substrates.

nanoscale

Application field: Nano-scale magnesium oxide has obvious small size effect, surface effect, quantum size effect and macroscopic tunnel effect. After modification, there is no agglomeration phenomenon, and it has many special functions in optics, catalysis, magnetism, mechanics, chemical industry, etc. And important application value, the prospect is very broad, is an important new material in the 21st century.

Application of Magnesium Oxide MgO

Magnesium oxide MgO is used to determine sulfur and pyrite in coal and sulfur and arsenic in steel. Used as a standard for white pigments. Light magnesia is mainly used as a raw material for the preparation of ceramics, enamels, refractory crucibles and refractory bricks. Also used as an activator for polishes, adhesives, coatings, paper fillers, accelerators neoprene and fluororubber. After mixing with solutions such as magnesium chloride, it can be made into an aqueous solution of magnesium oxide. It is medicinally used as an antacid and laxative for hyperacidity and duodenal ulcers. Used as a catalyst in the chemical industry and as a raw material for the manufacture of magnesium salts. Magnesium oxide MgO is also used in the manufacture of glass, dyeing powder, phenolic plastics, etc. Heavy magnesia is used in the rice milling industry for firing, grinding and semi-rolling. It is used in the construction industry to manufacture artificial chemical floors, artificial marble thermal insulation boards and sound insulation boards, and used as fillers in the plastics industry. It can also be used to produce other magnesium salts.

One of the main uses of magnesium oxide is as a flame retardant. Traditional flame retardant materials are widely used in flame retardant mixtures consisting of halogenated polymers or halogenated flame retardants. However, once a fire occurs, due to thermal decomposition and combustion, a large amount of smoke and toxic corrosive gases will be generated, which will hinder fire fighting and personnel evacuation, and corrode equipment and equipment. In particular, it has been found that more than 80% of fatalities in fires are caused by dense smoke and toxic gases from materials. Therefore, in addition to flame retardant efficiency, low smoke and low toxicity are also indispensable indicators of flame retardants. The development of my country's flame retardant industry is extremely unbalanced, and chlorinated flame retardants account for a large proportion, ranking first among flame retardants, among which chlorinated paraffin occupies a monopoly position. However, chlorine-based flame retardants will release toxic gases when they act, which is far from the non-toxic and efficient pursuit of modern life. Therefore, in order to comply with the development trend of low-smoke, low-toxicity, and pollution-free flame retardants in the world, it is essential to develop, produce and apply magnesium oxide flame retardants.

Magnesium oxide MgO price

The price of magnesium oxide MgO will change randomly according to factors such as magnesium oxide production cost, transportation cost, international situation, and magnesium oxide market supply and demand. Tanki New Materials Co., Ltd. aims to help industries and chemical wholesalers find high-quality, low-cost products, nanomaterials and chemicals by providing a full range of customized services. If you are looking for Magnesium Oxide MgO, please feel free to send an inquiry to get the latest price of Magnesium Oxide MgO.

Suppliers of Magnesium Oxide MgO

As a global magnesia MgO supplier, Tanki New Materials Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (titanium oxide, silicon oxide, titanium oxide, etc.), high-purity target materials, functional ceramics and structural devices, and provides OEM services.

More information about Magnesium oxide MgO powder
Magnesium Oxide MgO Properties (Theoretical)
Compound FormulaMgO
Molecular Weight40.3
AppearanceWhite Powder
Melting Point2,852° C (5,166° F)
Boiling Point3,600° C (6,512° F)
Density3.58 g/cm3
Solubility in H2ON/A
Exact Mass39.98
Monoisotopic Mass39.98
Magnesium Oxide MgO Health & Safety Information
Signal WordN/A
Hazard StatementsN/A
Hazard CodesN/A
Precautionary StatementsN/A
Flash PointNot applicable
Risk CodesN/A
Safety StatementsN/A
RTECS NumberOM3850000
Transport InformationNONH
WGK Germany1


The current international situation is highly uncertain, and its economic impact has not been able to be assessed properly. In addition, rising energy and commodity prices and supply chain disruptions are expected to push the price of the Magnesium Oxide, MgO Overview, Magnesium Oxide Application, MgO Suppliers, Magnesium Oxide Price higher.

Overview and wide application of molybdenum disulfide

Susano Paper and Pulp, the Brazilia-based company that is the world's largest pulp producer, has warned that global pulp stocks have been falling sharply and are facing shortages that could lead to higher prices for necessities such as paper towels and toilet paper in the future.  

Timber trade between Russia and Europe, an important supplier of timber to Europe, has been completely blocked due to the ongoing conflict between Russia and Ukraine, inhibiting the Molybdenum Disulfide,Overview of Molybdenum Disulfide,Application of Molybdenum Disulfide,Molybdenum disulfide price,Molybdenum Disulfide Supplier in the future are still very uncertain.

Overview of Molybdenum Disulfide

Molybdenum disulfide (or molybdenum) is an inorganic compound composed of molybdenum and sulfur.

{xunruicms_img_title}

Molybdenum disulfide is the main component of molybdenite. It is a black solid powder with metallic luster. The chemical formula of molybdenum disulfide is MoS2, the melting point is 2375°C, the density is 4.80g/cm3 (14°C), and the Mohs hardness is 1.0-1.5. It begins to decompose at 1370°C and at 1600°C into metallic molybdenum and sulfur.

Molybdenum disulfide is insoluble in water, dilute acid and concentrated sulfuric acid, generally insoluble in other acids, alkalis and organic solvents, soluble in aqua regia and boiled concentrated sulfuric acid.

Application of Molybdenum Disulfide

Molybdenum disulfide is used as a dry lubricant in greases, dispersions, friction materials and bond coatings. Molybdenum-sulfur complexes can be used in suspension, but are more commonly dissolved in lubricating oils at concentrations of a few percent. MoS2 is used as an additive for greases, friction materials, plastics, rubber, nylon, PTFE, coatings, etc.

1) Widely used in automobile and machinery industry, it is a good solid lubricating material.

2) Lubricants for drill bits, cutting tools and some non-oily and hard alloy steels; lubricant additives and film removers for non-ferrous metals.

3) Preparation of greases and additives for solid lubricating films, nylon filters and catalysts.

4) Synthetic molybdenum disulfide is used as a catalyst for desulfurization in refineries.

Molybdenum disulfide mixed with some volatile solvents can be sprayed on metal surfaces or added engineering plastics to make lubricating components. Molybdenum disulfide can be directly used in electronics, spraying, electroplating, hardware, screws and other industries.

Molybdenum disulfide is an important solid lubricant, especially suitable for high temperature and high pressure. It is also diamagnetic and can be used as linear photoconductors and semiconductors that display P-type or N-type conductivity, as well as rectification and energy conversion. Molybdenum disulfide can also be used as a catalyst for complex hydrocarbon dehydrogenation.

Molybdenum disulfide is also known as "the king of advanced solid lubricants". It is a solid powder made of natural molybdenum concentrate powder through chemical purification and changing the molecular structure. Molybdenum disulfide is black in color, slightly silver-gray, with metallic luster, greasy touch, and insoluble in water. It has the advantages of good dispersibility and non-adhesion. It can be added to various greases to form a non-adherent colloidal state, which can increase the lubricity and extreme pressure of the grease.

Molybdenum disulfide is suitable for mechanical conditions of high temperature, high pressure, high speed and high load to prolong the life of equipment.

Molybdenum disulfide price

The price of molybdenum disulfide varies randomly with factors such as production costs, transportation costs, international conditions, exchange rates, and supply and demand in the molybdenum disulfide market. Tanki New Materials Co.,Ltd aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for molybdenum disulfide material, please feel free to contact for the latest price of molybdenum disulfide.

Molybdenum Disulfide Supplier

As a global molybdenum disulfide supplier, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced engineering materials. The company has successfully developed a series of powder materials (zinc sulfide, tungsten sulfide, bismuth sulfide, etc.), high-purity targets, functional ceramics and structural devices, and provides OEM services.

Molybdenum Disulfide Properties
Other NamesMolybdenum Disulfide, Molybdenum Sulfide, MoS2
CAS No.1317-33-5
Compound Formula MoS2 
Molecular Weight160.07 g/mol
Appearance black/lead-gray solid
Melting Point2,375 °C (4,307 °F; 2,648 K)
Boiling PointN/A
Density5.06 g/cm3
Solubility in H2O (water)insoluble
Electrical ResistivityN/A
Poisson's RatioN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young's ModulusN/A
Exact Mass161.849549
Monoisotopic Mass161.849549
Molybdenum Disulfide Health & Safety Information
Safety WarningWarning
Hazard StatementsH315-H319-H335
Hazard CodesXi
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationNONH for all modes of transport
WGK Germany3


As the Russia-Ukraine conflict continues to develop, there is growing concern about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the Molybdenum Disulfide,Overview of Molybdenum Disulfide,Application of Molybdenum Disulfide,Molybdenum disulfide price,Molybdenum Disulfide Supplier may keep rising.

Introduction to the Application of Titanium Carbide (TiC)

Overview of Titanium Carbide TiC Powder

The chemical formula of titanium carbide is TiC. It is a steel grey crystal with a metallic sheen. It is thermally and electrically conductive, and its electrical conductivity decreases with increasing temperature, thus taking on the properties of a medal. It is a hard, high-melting compound, second only to diamond in hardness, with a microhardness of 2850 kg/mm2. The lattice constant a=4.173×10-8cm. The melting point is 3150 ℃, the boiling point is 4820 ℃, and the relative density is 4.9. TiN and TiO have the same lattice and the same parameters, so a series of continuous solid solutions can be formed between them. Heating above 1500 °C in H2 gas, C removal occurs gradually. The mixture of Ti(C,N) carbon nitride reacts with N2 gas above 1200 ℃ to form a variable composition. The oxidation rate of TiC is slow at 800 °C, but TiC powder can be combusted in O2 at 600 °C to generate TiO2 and CO2. At 1200 °C, it reacts with O2 gas to generate TiO2 and CO. It does not interact with water, but can react with water vapor to generate TiO2, CO and H2 at temperatures above 700 °C. Does not react with CO, but reacts with CO2 at 1200 °C to generate TiO2 and CO. Insoluble in hydrochloric acid and lye, soluble in nitric acid and aqua regia.

{xunruicms_img_title}

Application of Titanium Carbide TiC Powder

1. It is used in the fields of cutting tools, wear-resistant coatings, mold manufacturing, etc.;

2. Raw materials for powder metallurgy production of ceramics and hard metallurgy parts, such as wire drawing films, hard alloy molds, etc. Multiphase ceramics can be used in hard cutting tools, military armor materials, aerospace components such as gas storage tanks, engines in nuclear reactors, nozzle liners, turbine rotors, blades and structural components;

3. As a coating material, it can be used for diamond coating, fusion reactor anti-tritium coating, electrical contact coating, excavator tool coating, as well as foam ceramics, infrared radiation ceramics, etc.

 Titanium carbide TiC powder price

The price of titanium carbide TiC powder will change randomly with the production cost, transportation cost, international situation and market supply and demand of titanium carbide TiC powder. Tanki New Materials Co.,Ltd aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full range of customized services. If you are looking for titanium carbide TiC powder, please feel free to send an inquiry to get the latest price of titanium carbide TiC powder.

Titanium Carbide TiC Powder Supplier

As a global supplier of titanium carbide TiC powders, Tanki New Materials Ltd. has extensive experience in advanced, engineered material properties, applications and cost-effective manufacturing. The company has successfully developed a series of powder materials (including boron carbide, aluminum carbide, boron carbide, etc.), high-purity target materials, functional ceramics and structural devices, and provides OEM services.

Titanium Carbide Properties
Other Namestitanium(IV) carbide, TiC powder
CAS No.12070-08-5
Compound FormulaTiC
Molecular Weight40.1
AppearanceBlack Powder
Melting Point3160 °C
Boiling Point4820 °C
Density4.93 g/cm3
Solubility in H2ON/A
Exact Mass59.947946
Titanium Carbide Health & Safety Information
Signal WordN/A
Hazard StatementsN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
Transport InformationN/A


Application Fields of 316L Stainless Steel Powder

316L Stainless Steel Powder - Application Fields

316L Stainless Steel Powder This metal powder is used widely in many fields because of its outstanding corrosion resistance. Here is a detailed guide to using 316L stainless-steel powder in various fields.

1. Aerospace field

In aerospace, 316L Stainless Steel Powder is widely used for the manufacture of high-strength components that are corrosion resistant. 316L stainless powder has excellent resistance to oxidation and high temperatures. It can operate reliably and safely in harsh environments, such as high pressure and temperature. In the production of jet engines for instance, 316L steel powder is employed to produce high-temperature parts such as combustion chambers, turbine blades, etc. that can withstand up to 600°C and high pressure airflow.

Additionally, 316L powder is used for manufacturing structural components of high strength in aerospace vehicles. These include beams and frames. Due to the excellent welding and processing capabilities, it is easily transformed into various structural components that ensure dimensional accuracy.

2. Petrochemical Industry

In the petrochemical industries, 316L stainless powder is widely used for manufacturing high-strength corrosion-resistant pipelines and equipment. The 316L stainless steel powder has excellent corrosion resistance and can resist various chemical substances. This ensures the long-term stability of the equipment. For example, when manufacturing petrochemical machinery, 316L stainless powder is used to make high-temperature high-pressure pipelines and containers. This can withstand corrosion from various chemicals, while ensuring its sealing and strength.

Additionally, 316L stainless powder is used for manufacturing filters, separators, catalyst carriers, and other components within the petrochemical industry. Its high-temperature and corrosion-resistant properties can help ensure that equipment will operate reliably for a long time and increase production efficiency.

3.Medical field

In the medical field 316L powder stainless steel is widely used for manufacturing medical devices and implants of high standards. Its non-toxic, harmless, and biocompatible effects on human bodies, along with its high biocompatibility can guarantee the stability and safety of a product for a long time. This is why it's widely used to make medical devices and human implants. In manufacturing artificial joints and prostheses as well as other implants, 316L Stainless Steel Powder is used for support structures and connectors. It ensures strength and stability as well as corrosion and wear resistance.

316L powder is used extensively in the medical industry to manufacture surgical instruments and medical devices of high standards. Its good welding and processing performance allows for the manufacture of complex-shaped medical equipment.

4. Industrial sector

In the industry, 316L stainless powder is widely used for manufacturing high-strength corrosion-resistant equipment and components. You can use it to make high-quality mechanical elements such as bolts, springs, and chemical equipment. The excellent corrosion resistance and anti-oxidant performance of this material can help to ensure that the equipment will operate smoothly for a long time and increase production efficiency.

The power and electronic industries are also major users of 316L powder. 316L stainless powder is used in the manufacture of batteries and electronic components to produce components such as brackets, shells, and terminals. These components can enhance quality and safety.

Summary: 316L stainless-steel powder has a wide range of applications.

About KMPASS

KMPASS is a global supplier and manufacturer of high-quality nanomaterials, chemicals, and other materials. We have over 12 year experience. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. KMPASS, a leading manufacturer of nanotechnology products, dominates the market. Our team offers perfect solutions to improve efficiency, create value and overcome various challenges. Send an email to sales2@nanotrun.com if you are interested in 316L powder.

Application Fields of Nickel Based Alloys

Nickel Based Alloys: Applications

Nickel based alloy Based on nickel, it is made up of various alloying materials. It has excellent mechanical properties, high-temperature resistance and corrosion resistance. It's used in aviation and aerospace as well as petrochemicals and other industries. This article will give a detailed description of the Applications of nickel-based alloys in different fields such as aerospace, petrochemicals and power energy. It also provides references for Research and Application.

Applications of nickel-based alloys to the aerospace industry

The aerospace sector is a major application area for Nickel-based alloys These are the main components used in aerospace to produce high-performance products like aircraft, rockets and satellites.

Aircraft engine components

Aircraft engines include:

* The aviation industry's core equipment.

* Material with outstanding high-temperature resistance is required.

* Corrosion resistant.

* Mechanical properties

Nickel-based metals exhibit excellent strength at high temperatures, as well as creep and fatigue resistance. The alloys are widely used for aircraft engine parts, including turbine blades and guides.

Rocket engine components

Rocket engines are key equipment in the launch of satellites and space probes. They require materials with extreme high-temperature strengths and corrosion resistance. Nickel-based alloys In the manufacture of rocket engines are commonly used key components like combustion chambers. nozzles and turbine disks.

Satellite structural components

Satellites' structural components need materials with high temperature resistance, corrosion resistance and dimensional stabilities. Many structural components, including solar panels and structural frame frames, are manufactured using nickel-based materials.

Use of nickel-based alloys for the petrochemical Industry

Nickel-based materials are also widely used in petrochemicals. Nickel-based alloys are mainly used in the manufacture of key equipment, such as high temperature and high pressure reactors and pipes, for the petrochemical industries.

High-temperature reactor

High-temperature Reactors are:

The petrochemical sector's main equipment.

* Material with outstanding high-temperature resistance is required.

* Corrosion resistant.

* Mechanical properties

Alloys based on nickel have excellent high-temperature properties, corrosion resistance and mechanical characteristics. High-temperature reactors like hydrogenation reactors or reforming reactors are made with these alloys.

High-pressure pipeline

In the petrochemical industries, high-pressure pipes are essential equipment. Materials with excellent corrosion resistance, high-pressure resistance and mechanical properties are required. Nickel-based materials are widely used for high-pressure pipe manufacturing because of their excellent high-pressure resistance, corrosion resistance, as well as mechanical properties.

Applications of nickel-based materials in the field power energy

The electric energy sector is another area where nickel-based materials are used. These alloys are primarily used to manufacture high-temperature heat-exchangers and gas-turbines.

High-temperature heat exchanger

The high-temperature heat-exchangers in the power and energy industry are essential equipment. Materials with excellent resistance to corrosion, as well as mechanical properties, are required. Nickel-based materials have excellent mechanical, corrosion-resistant, and high-temperature properties. The alloys are widely used for high-temperature exchangers like air preheaters or flue gas exchangers found in coal-fired electricity stations.

Gas turbine blades

Gas turbines can be:

* Equipment for energy conversion and electricity generation.

* Material with outstanding high-temperature resistance is required.

* Corrosion resistant.

* Mechanical properties

In the manufacture of gas turbines such as blades or key components, nickel-based materials are used widely.

Applications of nickel-based alloys to biomedicine

Biomedical applications are another important area for nickel-based metals. These alloys are used to manufacture medical devices like artificial joints and vascular scaffolds.

Artificial joint

Artificial joints can be:

* Medical devices which replace diseased joints.

* Requires materials with excellent corrosion resistance.

* Biocompatibility.

* Mechanical properties

Alloys based on nickel have excellent corrosion resistance and biocompatibility. They are also used to manufacture artificial joints.

Vascular stent

Materials with outstanding corrosion resistance and biocompatibility are required for vascular stents. Nickel-based materials are highly corrosion resistant, biocompatible, and flexible and are widely used for vascular devices.

As a summary, nickel-based materials have been extensively used in the fields of aerospace, petrochemicals power energy and biomedicine. In the future, with the continued development of technology and the use of nickel-based materials, they will become more widely used, contributing to industrial and technological development.

About KMPASS

KMPASS is a global chemical supplier & manufacturer that has over 12 year experience in providing high-quality Nanomaterials and chemicals. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. KMPASS, a leading manufacturer of nanotechnology products, dominates the market. Our expert team offers solutions that can help industries improve their efficiency, create value and overcome various challenges. You can contact us at sales2@nanotrun.com for Inonel 718 Powder.

The role of molybdenum in the new energy industry

Molybdenum's role in the New Energy Industry

I. I.

As a result of the recent changes in the global energy market, the energy sector is growing rapidly. Solar, wind, biomass, water, geothermal and many other fields are included in the energy market of tomorrow. Renewable energy is also used as a primary raw material. The energy sector of tomorrow will be dominated by molybdenum because it is rare. This article will examine the characteristics, principles, and applications of molybdenum so that you can understand the importance of this element in the current energy industry.

2. Property of molybdenum

Molybdenum has high melting, boiling and strength properties, as well as corrosion resistance. Its chemical properties make it insoluble in acids, alkalis, and water. The molybdenum dioxide has excellent thermal and electrical stability. This makes it an important component of the new Energy Industry.


3. Molybdenum's role in the New Energy Industry

solar industry

The solar industry is one that converts and uses solar energy. Molybdenum compounds and their derivatives play a major role in the Solar Industry.


(1) Photovoltaic Material: The molybdenum material is a good photovoltaic because it has high conversion efficiency. Molybdenum can be added to solar cells in small amounts to improve their photoelectric conversion and lifetime.


Molybdenum can be used for high temperatures equipment like solar collectors and boilers. This will improve the thermal performance and stability of these equipment.

Wind Energy Industry


Wind energy is an industry that uses the wind to convert and use energy. Molybdenum compounds and molybdenum play important roles in wind energy.


(1) Wind turbines. Molybdenum, and its alloys, have excellent strength and corrosion resistance properties. They can be used for key components like blades and main shafts in wind turbines. This will improve the safety and service life of the equipment.


(2) Lubricants. Molybdenum compounds and their compounds are excellent lubricants and can reduce the friction loss of wind turbines and equipment failure rates.


Hydropower industry

The hydropower industry is an industry that uses water energy as a source of energy. Molybdenum compounds and molybdenum play important roles in hydropower.

Molybdenum can be used for key components like blades and main shafts in hydrogenerator units. This will improve the life of the equipment and its safety.


Fluid accessories. Molybdenum compounds and their alloys have excellent fluidity, corrosion resistance and are suitable for making fluid accessories to improve fluid efficiency and durability in hydroelectric generators.


Geothermal Energy Industry

Geothermal energy is an industry that uses the geothermal heat to convert and utilize energy. Molybdenum compounds and molybdenum play important roles in geothermal energy.

(1) Geothermal equipment: Molybdenum can be used in the manufacture of key components, such as heat-exchangers and boilers for geothermal equipment to improve thermal stability and efficiency.


Molybdenum can be used for the production of components like heat exchangers, pipes and other geothermal equipment. This will improve thermal efficiency.

Biomass Energy Industry

The biomass energy industry uses biomass energy to convert and utilize energy. Molybdenum compounds and molybdenum play important roles in the bioenergy industry.


Molybdenum can be used for the production of boilers and burners in biomass combustion equipment. This will improve their thermal stability and efficiency.


Molybdenum is a good catalyst and can be used in the production of biofuels to increase yield and improve quality.


4. Molybdenum applications in the new energy sector

Solar power generation. Molybdenum has a major role to play in the solar cell and is an important material for solar energy generation systems.

Molybdenum has a significant role to play in wind turbines. It is also a critical material for wind energy generation systems.

Molybdenum has a vital role to play in the hydroelectric generation of power. It is one key material used in these systems.

Molybdenum has a major role to play in geothermal equipment. It is also a critical material for the systems that generate geothermal electricity.

Molybdenum has a vital role to play in the production of biofuels and in the combustion of biomass. It is also a crucial material for biomass energy systems.


5. Molybdenum in the new energy sector

Molybdenum demand will increase with the rapid development in the new energy industry. Gleichzeitig, due to the rapid development of technology and cost reduction, the use of molybdenum within the new energy industry is set to increase. Molybdenum's application in the energy industry is expected to continue expanding, and will contribute to the growth of green power.

What is Zinc Sulfide

Zinc Sulfide:

Its chemical formula is ZnS. The molecular weight of the compound is 134.72. It is created by interacting through ionic interactions with zinc ions, (Zn2+), and sulfur ions, (S2-). The sulfur ions form a regular tetrahedron in which the zinc ion sits in the middle. The sulfur ion occupies the center of the tetrahedron. This structure can also be described as a face centered cubic crystal system where zinc and sulfur ions are located at the vertex and center of the lattice.

Zinc Sulfide (also known as Zinc Sulfide) is an insoluble, white solid. It is not soluble in water. However, it is soluble with bases and acids. Zinc sulfide's density is 3.98 g/cc, with a melting point of 1350 degrees C. and an optimal boiling temperature of 1600 degrees C. It is also very transparent and has a good optical transmission. The chemical properties are relatively stable but they can also change under certain circumstances. Zinc sulfide is oxidized, for instance, when it comes into contact with an oxidizing substance. In an environment that is alkaline, zinc hydroxide can be formed by the reaction of zinc sulfide with hydroxide.

Application Of Zinc Sulfide

Zinc sulfide, also known as zinc sulfur, is an important compound. The unique crystal structure and chemical and physical characteristics of zinc sulfide have made it a widely used compound in a variety of fields. We will discuss the various applications of zinc sulfide.

1. Manufacturers of phosphor

Zinc Sulfide has many uses, including in fluorescent screens. Zinc sulfide, used in the manufacture of fluorescent screens, can be made into phosphors which, upon being excited by external lights, emit a variety of colors. In the manufacture of fluorescent lamps, zinc-sulfide also makes phosphors which emit visible light upon being excited by ultraviolet radiation.


2. Manufacturing of photoelectric conversion materials

Zinc Sulfide, a material used for photoelectric conversion, can also be used in the manufacture of solar cells. Zinc sulfide converts light energy into electrical power in solar cells. The photoelectric efficiency of zinc sulfide, combined with its low cost, makes it a material that has wide applications.


3. Drug Manufacturing

Zinc Sulfide, because of its biological activity, has many applications in pharmaceutical production. Zinc sulfide is used in the manufacture of anti-malarials, including zincsulfate as well as zinc acetate. The zinc sulfide used can be used for the production of preservatives and fungicides.


4. The manufacture of catalyst

Zinc sulfur acts as a catalyst for the creation of other compounds like zinc acetates, acetones, and methylisobutylketone. Zinc sulfur is a highly active and selective catalyst in manufacturing.


5. Optical device manufacturing

Due to its high transparency, zinc sulfur is used widely in optical devices. Zinc sulfide is used, for instance, in optical fiber communication to produce optical fiber preforms. Additionally, zinc sulfide may be used to make optical devices like optical Windows and lenses.

Method of Production of Zinc Sulfide

1. Method of chemical precipitation

The chemical precipitation method is the most common way to prepare zinc sulfide. The zinc sulfide was obtained by mixing zinc salt with sulfur salt in solution.

Preparation Solution: Dissolve a suitable amount of zinc salt and sulfur salt into water to create a solution.

Precipitation reaction : the above solution is heated in stirring conditions and an appropriate amount precipitating agent is then added to precipitate both zinc ions (and sulfur ions) to generate zinc-sulfide precipitation.

Filtration : The reaction is filtered in order to obtain a filtrate that contains zinc-sulfide precipitation.

Cleaning: The filtered precipitation of zinc sulfide is cleaned with alcohol in order to remove impurities.

Drying: After washing the zinc sulfide it is precipitated then dried to get zinc sulfide.

Chemical precipitation is easy to do, inexpensive, and produces a product of high purity. The disadvantages of this method are that it requires many detergents and precipitating agents. Also, the waste liquid generated must be further processed before being discharged, which can cause environmental pollution.


2. Synthesis of solid phases at high temperatures

Traditional methods for the preparation of zinc sulfide include high-temperature solid-phase synthesis. A solid reaction of sulfur oxides and zinc at high temperature produced zinc sulfide.

Ingredients: To make raw materials, the appropriate amount of carbon powder, zinc oxide powder, and sulfur dioxide powder is mixed.

Pretreatment: Raw materials undergo a pretreatment at high temperature to ensure that all components react and generate zinc and sulfur vapour.

Synthesis: Zinc and sulfur are combined at high temperature to form zinc sulfide.

Collection: The powdered zinc sulfide is collected and processed accordingly.

The high-temperature, solid-phase synthesis is characterized by high purity, excellent crystallinity, as well as a relatively straightforward process. The method does require high-temperatures and large quantities of carbon and sulfur powder.


3. Solventothermal Method

The solvothermal process is a method that has been developed to prepare zinc sulfide. The method is to dissolve zinc salts and sulfur salts in organic solvents under high pressure and temperature. This produces zinc sulfide by hydrothermal reactions.

Preparation Solution: Dissolve an appropriate amount of zinc salt and sulfur in organic solvent.

High-temperature reaction under high pressure: The solution is placed into a reactor at high temperatures and high pressures, and a hydrothermal process is performed in high-pressure and high heat conditions to produce zinc-sulfide.


The generated zinc powder is collected, and treated as required.

The solvothermal technique has the advantage of a high purity product, good crystallinity as well as a relatively straightforward process. The method is also capable of using different organic solvants and reaction conditions in order to regulate product properties. The method is not without its limitations. It requires high-temperature, pressure equipment. And the recovery and disposal process of organic solvents are expensive and require certain technology.

It is important to consider the advantages and limitations of different methods of production of zinc sulfide, and to select the appropriate methods according to actual conditions and needs. During the production, it is important to take into account environmental and safety issues and implement appropriate technologies and measures for environmental protection.

Prospect Markets of Zinc Sulfide ()

1. phosphor market prospects

Zinc sulfur is widely used to manufacture phosphor. Phosphor can emit light in different colors and absorb light. It is used widely in the display, lighting, photovoltaic, and other fields. With the development of science, phosphors' application fields are expanding. Zinc sulfide has become an important material for phosphors, and the market is growing.


2. Photoelectric conversion materials: market outlook

Zinc sulfur is also widely used for the production of photoelectric materials. Solar cells, the most popular application of photoelectric materials, can convert light into electricity. The demand for solar panels is increasing as renewable energy becomes more important. The cost of photoelectric converter materials has also been steadily decreasing, as technology continues to improve.


3. Market prospects for drug manufacturing

Zinc Sulfide has also been used in the pharmaceutical industry. The pharmaceutical industry is a massive market. As people become more health-conscious, the demand for drugs increases. Zinc Sulfide can be used for antimalarial drug production and has a biological activity.


4. Prospects for the manufacturing of catalysts

Zinc sulfur is used for some catalyst production. Catalysts are substances that accelerate chemical reaction and have a variety of applications, including in the fields of environmental protection, pharmaceuticals, and chemical industries. As technology continues to develop, so do the demands for catalytic performance and selectivity. This provides more opportunities for using zinc sulfide as a catalyst.


5. The optical device market is expected to grow at a rapid rate.

Zinc sulfur is also widely employed in the manufacture of optical devices. The optical device has multiple applications, including communication, imaging and optical storage. It can modulate and transmit the light. As technology continues to develop, performance requirements for optical products are increasing. This provides more opportunities to apply zinc sulfide when manufacturing optical devices.

Price of Zinc Sulfide powder :

Many factors influence the price of a product, such as the economic activity in the industry, the demand and supply on the market.

You can contact us for a quotation if you want to know the current price of zinc sulfide.

Zinc Sulfide Powder Supplier :

Technology Co. Ltd., () is an experienced global chemical material manufacturer and supplier with over 12 years' experience. They provide super-high-quality chemicals, such as silicon powders, nitride particles, graphite particles, zinc sulfide grains, boron grains, 3D-printing powders, etc.

Contact us if you need high-quality zinc oxide powder.

Newspwyt is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high quality chemicals and Nano materials such as graphite powder, boron powder , zinc sulfide , nitride powder, Calcium nitride, Ca3N2, 3D printing powder, and so on.


And our innovative, high-performance materials are widely used in all aspects of daily life, including but not limited to the automotive, electrical, electronics, information technology, petrochemical, oil, ceramics, paint, metallurgy, solar energy, and catalysis. Our main product list as following:

Metal and alloy powder: boron, nickel, silicon, copper, iron, aluminum. chrome, silver

Boride powder: magnesium boride, aluminum boride, boron nitride, boron carbide, hafnium boride;

Sulfide powder: Molybdenum sulfide, zinc sulfide, bismuth sulfide;

Oxide powder: ITO, ATO, iron oxide, titanium oxide, manganese oxide, copper oxide;about.jpg

Carbide powder: titanium carbide, manganese carbide, titanium carbonitride, hafnium carbide;

Nitride powder: Aluminum nitride, hafnium nitride, magnesium nitride, vanadium nitride;

Silicide powder: hafnium silicide, molybdenum silicide, tantalum silicide;

Hydride powder: Hafnium hydride, vanadium hydride, titanium hydride, zirconium hydride.etc.

Have any questions or needs, please feel free to contact Newspwyt.